How to Read Sam File in Windows Xp

Reverse Engineering

This page is about cracking (recovering) passwords on Windows XP machines, which is a computationally difficult process. If you just need to set a new password (but without need to recover the old one), then this guide is not for you. For that, you can use, for example, the free-software tool Offline NT Password & Registry Editor or other similar programs.

Background [edit | edit source]

The Windows XP passwords are hashed using LM hash and NTLM hash (passwords of 14 or less characters) or NTLM only (passwords of 15 or more characters). The hashes are stored in C:\WINDOWS\system32\config\SAM. The SAM file is encrypted using C:\WINDOWS\system32\config\system and is locked when Windows is running. This file is a registry hive which is mounted to HKLM\SAM when windows is running. The SYSTEM account is the only account which can read this part of the registry. To get the passwords, you need to shutdown Windows, decrypt the SAM file, and then crack the hashes. If everything goes well, you'll have the passwords in 15 minutes.

The hashes can be also obtained from running system using software like pwdump. However, it requires to be run under an account with administrator privileges.

Three ways to recover Windows Password [edit | edit source]

Usually, we can recover Windows admin password in two traditional ways. The first is to change Screen password with another admin account; the second is to recover the previous password with the windows password reset disk that had been created before you forgot the password. Take Windows XP for example,

• At the Windows XP login prompt when the password is entered incorrectly click the reset button in the login failed window.

• Insert the password reset diskette into the computer and click Next.

• If the correct diskette Windows XP will open a window prompting for the new password you wish to use.

However, we often ignore the importance of security until we have been locked out of computer. Fortunately, there is still the last way that can unlock your computer without reinstalling - erase Windows password with Windows password reset CD, which can recover admin password for Windows 7/XP/Vista/NT/2000/2003.... Take Windows Password unlocker for example, followings are the steps to create the reset CD

• Download Windows Password Unlocker from Password Unlocker Official site

• Decompress the Windows password unlocker and note that there is an .ISO image file. Burn the image file onto an blank CD with the burner freely supported by Password Unlocker.

• Insert the newly created CD into the locked computer and re-boot it from the CD drive.

• After launched the CD, a window pop up with all your account names(if you have several accounts) select one of the accounts that you have forgotten its password to reset it.

Detailed Instructions for LoginRecovery.com Service [edit | edit source]

• Go to http://loginrecovery.com/ and from the home page click the option to download either the floppy disk image or CD image. If you use the floppy disk image, insert a blank floppy disk into your computer, run the program and a bootable floppy will be created. If you use the CD version, you will need to manually burn the ISO image to a CD, using software which specifically burns ISO images

• Insert the floppy disk or CD into the target computer from which you wish to extract the passwords. Then boot the computer. You may need to alter the BIOS settings to ensure the floppy drive or CD is booted from.

• If you used the floppy drive some messages will briefly appear on the screen and then the computer will shutdown. On the floppy disk will be a newly created file called "upload.txt" which will contain the encrypted passwords. If you used the CD version, the encrypted passwords will be shown on the screen; write them down into a text file.

• If you wish to wait up to 48 hours or pay to get your passwords, then you can upload the file onto the LoginRecovery site. Otherwise, continue reading.

• The file will consist of several 2-line entries, one for each account. Copy the 2 lines for the account you want and paste it into this utility to decode it into the "pwdump" format.

• Use any of the tools in the following section to decode the pwdump hash.

Notes [edit | edit source]

• If the information retrieved from the pwdump consists of an empty first part, then the LM hash is not stored. This means that the password is blank, in which case it would look like this:

Administrator:500:0: _31,D6,CF,E0,D1,6A,E9,31,B7,3C,59,D7,E0,C0,89,C0,xxxxx:::        

If it says anything different, then they implemented better security and force you to crack the NTLM hash, which is much more difficult and out of the scope of this guide.

• This only works if the password is 14 characters or shorter
• If the password in Windows 2000/XP/2003 is longer than 14 characters, it will be shortened to two hashes of length seven characters each
• An alternative, which uses the same method of comparing known hashes against unknown is called RainbowCrack, available at http://www.antsight.com/zsl/rainbowcrack/ although this program uses Rainbow Tables that can be in excess of 64 Gb; these tables can be obtained at http://rainbowtables.shmoo.com/
• A comprehensive project of comparing known hashes against an unknown is at http://www.rainbowcrack.com/ however it requires that you submit a Rainbow Table before you can gain access to their server

Defense against attack [edit | edit source]

• Have a password longer than 14 characters.
• http://support.microsoft.com/kb/299656/ - prevent Windows from storing LM hashes

Mac OS X 10.3 [edit | edit source]

Mac OS X 10.3 (Panther) also stores shadowed LM+NTLM hashes for each user. They can be cracked in the same way as the hashes for Windows above

• First find the "generateduid" for the user you want with the command

$          niutil -readprop . /users/<username> generateduid          70902C33-AC79-11DA-AFDF-000A95CD9AF8        

• The hashes are stored in the file /var/db/shadow/hash/<generateduid>. The file is 104 characters long, consisting of the 64-character NTLM+LM hashes and the 40-character SHA1 hash. To retrieve the NTLM+LM hashes, you can run this command as an administrator for example

$          sudo cut -c1-64 /var/db/shadow/hash/70902C33-AC79-11DA-AFDF-000A95CD9AF8          996E6760CDDD8815A2C24A110CF040FBCC5E9ACBAD1B25C9AAD3B435B51404EE        

• The hashes are stored in the reverse order as the pwdump format (NTLM first instead of LM first), so you need to switch the 32-character halves and insert a colon between them

CC5E9ACBAD1B25C9AAD3B435B51404EE:996E6760CDDD8815A2C24A110CF040FB        

• Then follow the instructions for Windows passwords

Mac OS X 10.4 [edit | edit source]

Mac OS X 10.4 (Tiger) improves the security by only storing LM+NTLM hashes for users who enable Windows Sharing for their account; and when they do enable it, it asks them to enter their password with a warning that their password is stored in a less secure format. However, for those users with Windows Sharing enabled, the above method will still work. The shadow file format is a little different, but the LM+NTLM hashes are still the first 64 characters. If the hashes are not stored, you will get all 0's when you try to retrieve the hashes.

Samba passwords [edit | edit source]

In older versions of Samba, the password hashes for Samba users were stored in the file /etc/smbpasswd (location may vary, only root has access) and are in similar format to Windows password hashes discussed above. In newer versions of Samba, run the following as root to get the same information:

pdbedit -L -w        

How to Read Sam File in Windows Xp

Source: https://en.wikibooks.org/wiki/Reverse_Engineering/Cracking_Windows_XP_Passwords

Share this post